Powerful wide frequency range yet easy to build. Commercially there is an antenna made by the company antenna direct called the c5.
Vhf low from 54 to 88 channels 2 6 vhf high from 174 to 216 mhz channels 7 13 and uhf from 470 to 698 mhz channels 14 51 channels 52 69 or 698 806 mhz have remained in limited use by some low power stations.
How to make a vhf tv antenna.
The post can be found here.
Prepare a wooden board.
Make your own vhf uhf antenna.
One of the members on digitalhomeca built a clone c5 and modeled this clone in 4nec software.
The goal is to leave the 21 to 22 inches of cable exposed.
Bend each section of wire.
A vhf marine antenna gets its name because it is used to broadcast transmissions from water.
It is a high gain vhf antenna where the gain values are around 8db or so for rf13.
My best experiment yet.
Broadcast television in north america occupies three radio frequency bands.
Each should be bent so that each side is 7 inches 1778 cm long.
Cut 8 sections of copper wire.
It should be 1x3 inches 254x762 cm or 2x3 inches 508x762 cm.
If you have a little free time on your hands and are interested in a project you can actually make your own antenna rather than buy one.
Therefore this type of antenna is commonly used in boats.
Each section should be 14 inches 3556 cm long.
Make stealth hawk tv antenna vs the hybrid tv antenna.
Remove 21 or 22 inches of the outer insulation of the coaxial cable and the shield of the wire from one side of the inner coaxial cable.
Be careful not to cut into the coaxial cable or you will have to start over.
Brings in vhf high as if it were uhf.
No comments:
Post a Comment