Cut all of your wood pieces on a table saw 12 wide 11 deep and 9 high. This includes the base and the sides.
Nothing is better for keeping clutter contained than boxes and bins.
How to make a wooden box.
Once the pieces are cut sand any rough edges.
Youll need to cut out holes with a jigsaw and attach the outdoor planter boxes to the house with some screws.
You can build this wooden planter box in less than an hour.
Lay 2 of your 1x2 support pieces and lay them on the outer edges of the wood.
It makes it easy to see when making your cut line with the speed square.
Prime and paint all the pieces.
After the paint or stain dries apply two coats of paint or polyurethane.
How to make a wooden box making a wooden box with a hinged lid choose your wood.
If you have a miter clamp and a hand plane like i do it saves you a lot of trouble.
I recently made a few wooden boxes to give out as christmas gifts.
As you screw the long sides in.
Cut your boards if not already to size.
Assemble the side pieces using a butt joint.
Use a tape measure to find the entire length of the box.
But sometimes its hard to find one to fit your space.
Measure and mark your boards.
Glue with wood glue.
Make one of these diy wooden boxes to organize your home today.
Box can be used for storing smaler things jewlery.
Attach a hinged lid to the box.
For this project you are going to need a few common tools like a saw a chisel glue clamps wood some sand paper and some hinges.
Hope you enjoy the video and are able to learn something new.
How to make small wooden box from spruce and cgarry wood.
This one is 8 and 1516 when you measure it out make a big triangle that terminates at your measurement.
Sand between coats with the sanding sponge for a smooth final finish.
Use the clay pots to add some color and up your homes curb appeal.
Here are 16 more ways to add curb appeal for less than 50.
Repeat with the second side and.
Lightly sand all the edges of the parts with a 180 grit sanding sponge photo 6 and apply a stain blocking primer or wood stain to the assembled box.
Attach the sides to the base.
No comments:
Post a Comment